Unidades de disco duro interno SATA I

Comprar por categoría

Buscar por Factor de forma

Buscar por Capacidad de almacenamiento

30,380 resultados

  • Interfaz: SATA I- Selected

Frequently Asked Questions about SATA I Internal Hard Disk Drives

SATA, also known as Serial AT Attachment, is a type of bus interface that connects a hard drive to the motherboard of a computer. If you want to expand the storage space in your computer or you're trying to build a computer from scratch, then you can choose from a variety of different SATA I hard drives. Each of these has their own specs and features, and most of them can be found on eBay.

How do you choose the right SATA hard drive?

When choosing a SATA hard drive, you should look for the following specs:

  • Storage space: Modern commercial hard drives can vary between 256GB in size all the way up to 8TB although older legacy computers may need less storage space.
  • Form factor: There are two main types of form factors. The 2.5-inch drive is appropriate for laptops and small computers. The 3.5-inch drive is designed for desktop computers.
  • Rotational speed: The rotational speed determines the average rotational latency, meaning the time it takes for the disk to rotate into position. A 4,800RPM disk has an average latency of 6.25 milliseconds whereas a 10,000RPM disk has a latency of 3 milliseconds.
  • Cache: The cache is a small pool of memory embedded on the hard drive. It acts as a buffer that stores data temporarily while it is being moved between the hard drive and the computer. Since the cache is faster than the disk itself, this can speed up the access of data.
What is SATA I?

SATA I is the first version of the SATA interface. Introduced in 2003, the first-generation SATA was followed by two more generations. It supports a raw data rate of 1.5 gigabits per second although the actual data transfer rate is somewhat lower, around 1.2 gigabits per second. For this reason, SATA I is also sometimes known as SATA 1.5Gb/s. SATA I also supports hot swapping, which means the ability to replace the drive without shutting down the computer.

Are different versions of SATA compatible with each other?

Yes, SATA is designed to be forward and backward compatible. All versions of SATA use the same basic interface and command sets to prevent interoperability problems every time a new revision is introduced. A SATA I hard drive still operates at the same speed when plugged into the SATA interface, but you won't need to worry about compatibility. SATA is also compatible with the previous Parallel ATA standard through the use of an adapter.