2GB DDR3-1333 RAM Ordenador

Buscar por

A Guide to PC3-10600 Modules at 1333 MHz, From 1GB to 16GB

Random access memory can operate from a variety of data frequencies. The 3GB DDR3 processing chip triples data cycles for random access. These PC3-10600 memory modules operate at frequencies of 1333 MHz and sustain processing cycles through installed synchronization.

Do DDR3 features require extra computer power?

You do not need additional power to use a double data rate stick. The motherboard is constructed with four memory slots that can power installed 1GB DDR3 memory modules up to 16GB DDR3 sticks. These slots for DDR3 or SODIMM memory sticks often come in fours, with two sets of DDR3 or SODIMM sticks as the very minimum. Each memory stick is placed with toggles to offer a locking mechanism that makes finding these openings for DDR3 SDRAM easy. The latches create a complete circuit that allows electrical voltage to pass through 1GB to 16GB DDR3 RAM running at 1333 MHz. The hardware will run on these binary positive and negative charges in a PC3-10600 module DDR3 type RAM.

Why are memory sticks replaced with a DDR3 module?

Memory sticks are removable pieces that can be added or taken away in order to install new DDR3 SDRAM such as these 1333 MHz DDR3 PC3-10600 modules. Memory sticks are often sold as replacements for prior modules that have been overloaded or damaged. This flexibility ensures that random access modules will continue to be separate from the motherboard. Random access memory will have access to multiple RAM features because a motherboard can be equipped with multiple PC3-10600 slots to utilize the 1333 MHz DDR3 data rates.

Can too much RAM make your hardware work slower?

Random access memory is designed to ensure that a CPU works seamlessly if the right megabytes, megahertz, and DIMM connections are made. This seamless function is based on the way memory modules process data. Such specifications are important, as this SDRAM stick synchronizes data and the internal processes of computer memory. The performance of your computer can actually decrease by maxing out your hardware components.

Should RAM match the use it’s intended for?

Random access memory is a variable component that increases and decreases based on user needs. Your computer hardware has the potential to operate on a common number of four sticks, with more possible in some cases, depending on the motherboard. The process you enable in connecting SO-DIMM memory is the circuited capacity of your hardware. The module operates at 1333 MHz and a steady DDR3 sequence.

You can also consider these factors for how RAM is used:

  • Dynamic memory refreshing: Dynamic is a feature that refreshes memory and allows it to revert to where it once was. Think of the refreshing as how a RAM stick stays clear of obstructions. This refreshing is how fast data can be retrieved as long as those data were noted and placed within RAM.
  • Timing release with SDRAM: Expect factory coordination in this module that comes from its synchronous circuits. This feature manages the cycles that data undergoes, so your memory is never diverted from a straight stream.

Categorías